Sublimation Rock Slate Blanks | Plaques & Coasters
Sublimation Rock Slate Blanks | Plaques & Coasters
Couldn't load pickup availability
Description
Description
Make photo gifts, memorial plaques, and personalized décor with these natural rock slate sublimation blanks. Each piece has a smooth, glossy white sublimation face and a naturally textured edge.
Choose your shape and size
Each purchase includes one blank. Measurements are approximate because natural slate varies. Dimensions are width × height unless marked as diameter. Refer to the size guide in the product photos.
- Square Coaster — 10 × 10 cm (3.94 × 3.94 in)
- Round Coaster — 10 cm diameter (3.94 in diameter)
- Round Slate — Approx. 14 cm diameter (5.5 in diameter)
- Square Slate — 20.7 × 20.7 cm (8.15 × 8.15 in)
- Half-Round Slate — 30 × 30 cm (11.81 × 11.81 in)
- Half-Round Slate — 31 × 31 cm (12.20 × 12.20 in)
- Contour Slate — 20 × 20 cm (7.87 × 7.87 in)
- Contour Slate — 31 × 31 cm (12.20 × 12.20 in)
- Heart Slate — 15 × 15 cm (5.91 × 5.91 in)
- Heart Slate — 20 × 20 cm (7.87 × 7.87 in)
- Rectangle Slate — 19.7 × 14.7 cm (7.76 × 5.79 in)
- Rectangle Slate — 30.2 × 15.2 cm (11.89 × 5.98 in)
- Rectangle Slate — 30 × 19 cm (11.81 × 7.48 in)
- Round Slate — 30 cm diameter (11.81 in diameter)
Plaques include black display feet.
Sublimation instructions
Heat press: Mirror your design on sublimation paper. Position the slate face down and use a heat-conductive rubber pad. Press at 356°F (180°C) for 450–600 seconds. Remove the transfer paper immediately after pressing.
3D vacuum press: Mirror your design and use top and bottom heat with vacuum. Press at 374°F (190°C) for 8–10 minutes. Remove the transfer paper immediately after pressing.
Share
