Sublimation pu leather golf tee bag tag

-Blank PU Leather Coasters 

Approx. Size: 4" x 4"

Sublimation Instructions:
Wipe down coasters with alcohol just to make sure there is no debris.
Lay design down on the tag and tape it down and then lay butcher paper onto of that.
Press at 385 degrees for approx. 50 seconds, medium pressure and remove butcher paper and design right away.

- Temperature: 385 degrees and 40-50seconds
- Pressure: Medium pressure

NOTE:

• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
• The substrate should be at room temperature

Features

Downloads