Sublimation blank wine glass sleeve / holder / cover

Sublimation Neoprene Wine Glass Sleeve 

Thickness: 2.5mm

Step 1:
> Adjust the Heat Press Temperature: 400° F
> Time:30­-35 seconds

Note: These instructions, including transfer times and temperatures, are based on the inks, paper, ovens and products we use. Your inks, papers, etc. may require adjustments in your time/temp settings.

Step 2:
> Design and Print Your Transfers Prepare artwork and size transfer with consideration to the size of the holder,  Mirror Image: Image must always be produced in reverse to ensure right reading image once pressed into a holder. Most printers refer to this as “Flip Horizontal” or “Mirror”

Step 3:
Transfer the Image
1. Preheat press to400° F.
2.DO NOT pre­-press the sleeve!
3. Using heat resistant tape, tape the transfer image side down.
4. Place the flag on the heat press with the transfer on top.
5. Press at400° F for 30- ­35 seconds using medium to firm pressure.
6. Remove transfer while hot.

Features 

Downloads