1
/
of
1
We Sub’N
Matte Dtf film roll hot peel/cold peel ANTI STATIC!!
Matte Dtf film roll hot peel/cold peel ANTI STATIC!!
Regular price
$80.00 USD
Regular price
$130.00 USD
Sale price
$80.00 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
Description
Anti-static DTF (Direct to Film) film is designed to reduce static electricity during the printing process, preventing dust and debris from adhering to the film. It helps ensure better print quality and is commonly used in applications where static electricity interference is a concern.
325 feet long.
Coated on both sides (Only prints on 1 side)
Roll of DTF film for use with DTF inks
Warm / Cold Peel
DTF - Film: COLD Peel:
- Make sure that your hands are clean and dry before touching the film to avoid moisture. This will damage the coating of the film.
- Place the film with the matt side up over the printing area of your printer.
- Print over the film using the proper settings on your printer.
- Make sure that your hands are clean and dry before touching the film to avoid moisture. This will damage the coating of the film.
- Place the film with the matt side up over the printing area of your printer.
- Print over the film using the proper settings on your printer.
- To apply transfer press the printed transfer for 15 seconds at 320 ºF. Cooldown to the touch then peel the transfer.
For further instructions follow the directions from the Omniprint Direct to transfer document.
Note: The settings and application instructions are for We Sub’N+ transfer film, powder, and ink. Using other material or other inks may require different instructions.
Directions for DTF - Film: HOT Peel:
Make sure that your hands are clean and dry before touching the film to avoid moisture. This will damage the coating of the film.
- Place the film with the matt side up over the printing area of your printer.
- Print over the film using the proper settings on your printer.
- To apply transfer press the printed transfer for 15 seconds at 320 ºF. Smoothly Peel transfer while hot.
Note: The settings and application instructions are for We Sub’N+ transfer film, powder, and ink. Using other material or other inks may require different instructions.
Note: These will not fit on stock Epson Rollers
Share
